MDS Handling

Please find below a quick instruction how to use the MDS System.

 

View of Adjuster

(Dis)Assemble Spring Seat

To remove spring seat, remove snap ring in the lower spring seat position.

 

 

Disassemble Top eye

Carefully clamp the top eye without causing damage. Do not clamp the piston shaft.

  1. Turn jam nut counter clockwise to loose.
  2. Remove Top eye from piston shaft.
  3. Remove jam nut from piston shaft. Push rod / tube can be removed too. All disassempled parts have to be assigned to the damper they belong to.

 

 

Assemble Top eye

Carefully clamp the top eye without causing damage. Do not clamp the piston shaft!

  1. Turn jam nut clockwise to its end by hand.
  2. Enter hole with push rod.
  3. Turn Top eye clockwise to its end by hand.
  4. Tighten up jam nut with 40Nm.